JVC GZ-MG20 Instruction Manual - Page 9
Attaching the Core Filter, LCD Monitor
View all JVC GZ-MG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
GETTING STARTED Attaching the Core Filter Attach the core filters to the cables. The core filter reduces interference. 1 Release the stoppers on both ends of the core filter. GETTING STARTED EN 9 LCD Monitor Pull on the end of the LCD monitor and open the LCD monitor fully. It can rotate 270°. Stopper 2 Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. S-Video/Audio/Video/USB cable Wind the cable once around the outside of the core filter as shown in the illustration. Core Filter (Large) 3 cm Wind once. DC cord Wind the cord twice around the outside of the core filter as shown in the illustration. 3 cm Core Filter (Small) Wind twice. ● Wind the cable so that it is not slack. 3 Close the core filter until it clicks shut. S-Video/Audio/Video/ USB Cable DC Cord NOTES: ● Take care not to damage the cable. ● When connecting a cable, attach the end with the core filter to the camera.