JVC GZ-MG20 Instruction Manual - Page 77
Connections (Windows®), Connecting the USB cable
View all JVC GZ-MG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
NOTES: ● If PowerDirector/PowerProducer/PowerDVD have already been installed on the PC, uninstall them before installing the provided software. Video files captured with this camera can only be handled on the provided software. Please install and use the provided software (PowerDirector Express NE, PowerProducer 2 Gold NE, PowerDVD 5 NE). ● If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished. ● Windows Messenger has to been closed during CyberLink DVD Solution installation. If it is running during installation, [Information] screen appears. Connections (Windows®) Connecting the USB cable Connect the USB cable to copy still images and video files in a recording medium to the PC. PC Camera To USB connector To close Windows Messenger: 1) While holding [Ctrl + Alt] key, click [Delete] key so that [Task Manager] appears. 2) Click [Processes] tab. 3) Select [msmsgs.exe]. 4) Click [End process]. USB cable To USB connector 1 To assure safety, make sure all units are turned off before making any connections. 2 Use the USB cable to connect the camera to the PC. NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack. ● When the USB cable is connected, turning on or off the camera causes malfunctions of the PC. ● Connect the camera directly to the PC, not through the hub. ● Do not use an extension USB cable. - 13 -