JVC KD-X260BT Instruction Manual America - Page 22
Make a call, Make a call using voice recognition
View all JVC KD-X260BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
BLUETOOTH® Default: [XX] [SETTINGS] [AUTO ANSWER] [01 SEC] to [30 SEC]: Answers an incoming call automatically in the selected time (in seconds). ; [OFF]: Cancels. [RING COLOR] KD-X360BTS: [COLOR 01] to [COLOR 49] ([COLOR 08]): Selects the illumination color for the buttons as notification when there is an incoming call and during a call. ; [OFF]: Cancels. [RING ILLUMI] KD-X260BT/1/KD-SX25BT: [BLINK 01] to [BLINK 05] ([BLINK 02]): Selects the blinking pattern for the buttons as notification when there is an incoming call. ; [OFF]: Cancels. Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. "(First device name)" appears. • If two Bluetooth phones are connected, press again to switch to the other phone. "(Second device name)" appears. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. To return to the previous setting item, press . [RECENT CALL] (Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number. • "" indicates call made, "M" indicates call missed. • "NO HISTORY" appears if there is no recorded call history or call number. 2 Press the volume knob to call. [PHONEBOOK] (Applicable only if the phone supports PBAP.) 1 Press 2J / 1K to select the desired letter (A to Z, 0 to 9, and OTHERS). • "OTHERS" appears if the first character is other than A to Z, 0 to 9. 2 Turn the volume knob to select a name, then press the knob. 3 Turn the volume knob to select a phone number, then press the knob to call. • The phonebook of the connected phone is automatically transferred to the unit when pairing. • This unit can display only non-accent letters. (Accent letters such as "Ú" are showns as "U".) [DIAL NUMBER] 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. 3 Press the volume knob to call. [VOICE] Speak the name of the contact you want to call or the voice command to control the phone functions. (See "Make a call using voice recognition".) Make a call using voice recognition 1 Press and hold to activate the connected phone. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. 18 ENGLISH