JVC KD-X260BT Instruction Manual America - Page 23
Settings in memory, Store a contact in memory, Make a call from memory, Bluetooth mode settings
View all JVC KD-X260BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BLUETOOTH® Settings in memory Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6). 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK] or [DIAL NUMBER], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone number. 4 Press and hold one of the number buttons (1 to 6). "MEMORY P(selected preset number)" appears when the contact is stored. To erase a contact from the preset memory, select [DIAL NUMBER] in step 2 and store a blank number. Make a call from memory 1 Press to enter Bluetooth mode. 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. "NO PRESET" appears if there is no contact stored. Bluetooth mode settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit. To return to the previous setting item, press . Default: [XX] [BT MODE] [PHONE SELECT]* Selects the phone or audio device to connect or disconnect. " " appears in front of the device name when connected. [AUDIO SELECT]* " " appears in front of the current playback audio device. [DEVICE DELETE] 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob. [PIN CODE EDIT] (0000) Changes the PIN code (up to 6 digits). 1 Turn the volume knob to select a number. 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the PIN code. 3 Press the volume knob to confirm. [RECONNECT] [ON]: The unit is automatically reconnect when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels. [AUTO PAIRING] [ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels. [INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. [INFORMATION] [MY BT NAME]: Displays the name of your receiver ("KD-X3 BTS"/ "KD-X2 BT"/"KD-SX2 BT"). ; [MY ADDRESS]: Shows address of this unit. * You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time. ENGLISH 19