JVC KD-X260BT Instruction Manual America - Page 24
A PAIRING, X 6-digit passkey, B PAIRING, PIN IS 0000, C PAIRING, The connectivity result flashes
View all JVC KD-X260BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
BLUETOOTH® Bluetooth compatibility check mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "BLUETOOTH" "CHECK MODE" appears. "SEARCH NOW USING PHONE" "PIN IS 0000" scrolls on the display. 2 Search and select the name of your receiver ("KD-X3 BTS"/ "KD-X2 BT"/"KD-SX2 BT") on the Bluetooth device within 3 minutes. 3 Perform (A), (B) or (C) depending on what appears on the display. (A) "PAIRING" "XXXXXX" (6-digit passkey): Ensure that the same passkey appears on the unit and Bluetooth device, then operate the Bluetooth device to confirm the passkey. (B) "PAIRING" "PIN IS 0000": Enter "0000" on the Bluetooth device. (C) "PAIRING": Operate the Bluetooth device to confirm pairing. After pairing is done successfully, "PAIRING OK" "Device Name" appears and Bluetooth compatibility check starts. If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device to allow phonebook access to continue. "TESTING" flashes on the display. The connectivity result flashes on the display. "PAIRING OK" and/or "HANDS-FREE OK"*1 and/or "AUD.STREAM OK"*2 and/ or "PBAP OK"*3: Compatible *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access profile (PBAP) After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has been deleted, and the unit exits check mode. • To cancel, press and hold BSRC to turn off the power, then turn on the power again. 20 ENGLISH