JVC KD-X260BT Instruction Manual America - Page 34
Display Settings
View all JVC KD-X260BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
DISPLAY SETTINGS Zone identification for brightness settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit. To return to the previous setting item, press . Default: [XX] [DISPLAY] [DIMMER] Dims the illumination. [OFF]: Dimmer is turned off. Brightness changes to [DAY] setting. [ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting. (See "[BRIGHTNESS]" below.) [DIMMER TIME]: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: [PM6:00] ; [OFF]: [AM6:00]) [DIMMER AUTO]: Dimmer turns on and off automatically when you turn off or on the car headlights.*1 [BRIGHTNESS] Sets the brightness for day and night separately. 1 [DAY]/[NIGHT]: Select day or night. 2 Select a zone. (See the illustration on the left column.) 3 [LEVEL 00] to [LEVEL 31]: Set the brightness level. [TEXT SCROLL]*2 [SCROLL ONCE]: Scrolls the display information once. ; [SCROLL AUTO]: Repeats scrolling at 5-second intervals. ; [SCROLL OFF]: Cancels. [FORMAT]*3 KD-X360BTS: Below information is shown on the supplementary display when Bluetooth device is connected. (Page 33) [BATT/SIGNAL]: Shows the strength of the battery and signal. ; [DATE]: Shows the date. *1 The illumination control wire connection is required. (Page 40) *2 Some characters or symbols will not be shown correctly (or will be blank). *3 Functionality depends on the type of phone used. 30 ENGLISH