JVC KW-M740BT Instruction Manual America - Page 70
Controlling Audio, 3 way speaker system setup
View all JVC KW-M740BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Controlling Audio Controlling Audio You can adjust the various settings such as audio balance or subwoofer level. 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSource selection screen appears. 4 Touch [Audio]. 3 way speaker system setup Select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSource selection screen appears. 4 Touch [AV Off]. 5 Press the [FNC] (1) button and the [-] (2) button for 1 second at the same time. 2 1 hhSpeaker system select screen appears. 6 Select the crossover network mode. See the following section for each setting. • Set up speaker/ X'over (P.71) • Controlling equalizer (P.73) • Set listening position/ DTA (P.76) • Controlling general audio (Fader / Balance) (P.73) • Set volume offset (P.74) • Performing zone control (P.74) • Set sound effect (P.75) 70 hhA confirmation screen appears. 7 Touch [Yes]. NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Zone Control --Fader of Controlling General Audio --Front focus of Listening Position/ DTA --Select the speakers to output the sound from cell-phone of Blutooth HF/Audio --Beep of User Interface Setup • Connecting 3-way speakers with the 2-way mode selected can break the speakers.