JVC KW-M740BT Instruction Manual America - Page 73
Controlling General Audio, Equalizer Control, Controlling Audio, Speaker/ X'over setup P.71
View all JVC KW-M740BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Controlling General Audio 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSource selection screen appears. 4 Touch [Audio]. hhAudio screen appears. 5 Touch [Fader / Balance]. Controlling Audio 3 Touch [ ]. hhSource selection screen appears. 4 Touch [Audio]. hhAudio screen appears. 5 Touch [Equalizer]. 6 Touch the screen and set the Graphic Equalizer as desired. 6 Set each item as follows. ■■[Fader / Balance] Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment. Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. ■■Gain level (dotted frame area) Adjust the gain level by touching the each frequency bar. You can select frequency bar and adjust its level by [R], [S]. ■■[Preset Select] Displays the screen to recall the preset equalizer curve. ■■ [Memory] Saves the adjusted equalizer curve from "User1" to "User4". ■■ [Initialize] The current EQ curve returns to flat. ■■[ALL SRC] Apply the adjusted equalizer to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. ■■[Bass EXT] (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz. ■■[SW Level] Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker/ X'over setup (P.71). English 73