JVC KY-F560U KY-F560U Multi-purpose camera 48 page instruction manual - Page 15

Connecting the Power Supply Connect the [DC IN] terminal at the back of this unit to the [TO CAMERA] terminal of the AC adaptor (AAP700) using the power cable supplied (2 m). AC 120 V AA-P700 AC Adaptor AC 100V DC 12V=OUTPUT VIDEO OUTPUT S(Y/C) OUTPUT TO CAMERA EITHER OUTPUT MAX 1.25A SEE INSTRUCTION MANUAL White Marking [TO CAMERA] Terminal AW BARS MENU SET REMOTE LENS GENLOCK IN VIDEO OUT DC IN POWER SEE INSTRUCTION MANUAL [DC IN] Terminal Connect the end with white marking to the AC adaptor. Power Cable (2 m) (accessories) Plug DC IN POWER Ring ● Insert plug fully, turn ring and ensure that it is fastened. Connect the plug in the same way at the AC adaptor's end. Caution Ensure to make use of AA-P700 for the power supply. When connecting, ensure that power switch of AA-P700 is turned OFF. Connecting with the power on may give rise to malfunction of the equipment. Note Allow a 10 second interval after switching off the power before turning on again. If the power switch is turned ON and OFF too soon, malfunctioning such as startup failure may occur. 15