JVC KY-F560U KY-F560U Multi-purpose camera 48 page instruction manual - Page 41

"SYSTEM" Screen Settings in bold are factory settings Item "ASPECT RATIO" "NEGATIVE" "SET UP" "PIXEL COMPEN" "H PHASE" "SC COARSE" "SC FINE" "PAGE BACK" Function/Variable Values For setting the screen size for recorded video signals. "4:3" : Image output at aspect ratio of 4:3. "16:9" : Image output at aspect ratio of 16:9. The vertical resolution deteriorates as compared to the images of 4:3. Signals output from the [VIDEO OUT] terminal can be output as negative signals. "ON" : Outputs negative signals. "OFF" : Outputs normal video signals. For setting whether to add setup signals to the camera images. "ON" : Add setup signals. "OFF" : Do not add setup signals. For setting whether to perform white spot correction. "CANCEL" : Do not perform white spot correction. "EXECUTE" : Perform white spot correction. ☞ Page 26 'White Spot Correction' Adjust the horizontal (H) phase of this unit with respect to signals input to the [GENLOCK IN] terminal (external sync signals). Increase value : Adjusts horizontal phase back. Decrease value : Adjusts horizontal phase ahead. {Variable Values : -128 - 0 - +127} Coarse tune the subcarrier (SC) phase of this unit with respect to signals input to the [GENLOCK IN] terminal (external sync signals). Increase value : Adjusts phase back. Decrease value : Adjusts phase ahead. {Variable Values : 0˚, 90˚, 180˚, 270˚} Fine tune the subcarrier (SC) phase of this unit with respect to signals input to the [GENLOCK IN] terminal (external sync signals). Increase value : Adjusts phase back. Decrease value : Adjusts phase ahead. {Variable Values : -128 - 0 - +127} Press the [SET] button to return to the "MENU" screen when cursor is at this position. 41