JVC KY-F560U KY-F560U Multi-purpose camera 48 page instruction manual - Page 24

4. Various Modes of Shooting Shooting the Computer Monitor When shooting images of computer monitors or displays, horizontal bands will appear on the screen. To eliminate the bands, it will be necessary to align the shutter speed with the scanning frequency of the monitor. Computer Monitor 3. 4. - - - EXPOSURE - - - I R I S MODE AU TO MANUA L L EVE L - - - - - - GA I N STE P LEVE L 0d B SHUT TER STEP LEVEL NORMA L ADVANCED EXPOSURE . . PAGE BACK "EXPOSURE" Screen Band 1. Press the [MENU] button for 1-2 seconds. The "MENU" screen will be displayed. 2. Use the [ / ] buttons to select "EXPOSURE..", then press the [SET] button. 3. Use the [ / ] buttons to select "SHUTTER", then press the [SET] button. The set value starts blinking and adjustment is possible. 4. Use the [ / ] buttons to set value to "V.SCAN", then press the [SET] button. 5. Use the [ / ] buttons to select "LEVEL", then press the [SET] button. 6. Use the [ / ] buttons to adjust the shutter speed. Pay atten- tion to the screen If black bands are visible : use the [ ] button to lower the shut- ter speed If white bands are visible : use the [ ] button to increase the shutter speed 7. When bands are decreased to the minimum, press the [SET] button. This will be recorded in the memory of the unit. 8. Press the [MENU] button for 1-2 seconds. The normal screen will be displayed. 5. 6. - - - EXPOSURE - - - I R I S MODE AU TO MANUA L L EVE L - - - - - - GA I N S T EP LEVE L 0dB SHUT TER V. SCAN LEVEL 1 / 6 0.1 ADVANCED EXPOSURE . . PAGE BACK Note Vertical scanning frequency may vary with computer types and there are cases when bands may not be fully eliminated. In addition, frequency may also differ depending on the software used. 24