JVC KY-F560U KY-F560U Multi-purpose camera 48 page instruction manual - Page 44

6. Others Connecting the Remote Control Unit Menu function of the camera can be set using the remote control unit (RM-LP55 AND RM-LP57). (For further details, please refer to the instruction manual of the remote control.) AW BARS MENU SET REMOTE LENS RM-LP55 RM-LP55 REMOTE CONTROL UNIT GENLOCK IN VIDEO OUT DC IN POWER SEE INSTRUCTION MANUAL [MENU§/∫] FUNC 1 FUNC 2 W.PAINT GAIN SHUTTER IRIS MANU OPERATE ENTER MENU FUNC 1 FUNC 2 /SET FILE W.BAL GAIN SHUTTER FOCUS NEAR FAR SLOW FAST ZOOM WIDE TELE [FUNC2§/∫] [ENTER/SET] [FAR] Ⅵ When operating the menu function of this unit from RM-LP55 Set the "CAMERA TYPE" setting no. of RM-LP55 to "3". Connection Connect cable of the remote control unit to the [REMOTE] terminal of this unit. Operation 1. Press the [ENTER/SET] and [FAR] buttons at the same time when turning the [OPERATE] switch to [ON]. Display on LCD screen will be as shown in the following diagram. AUTO IRIS LEVEL ON 2. Use the [MENU§/∫] buttons to display the "CAMERA TYPE" setting screen. Display on LCD screen will be as shown in the following diagram. CAMERA TYPE 1 Camera Type Setting No. 3. Use the [FUNC2§/∫] buttons to set the camera type setting no. to "3". 4. Pressing the [ENTER/SET] button returns to the normal mode of use after "INITIALIZE" is displayed. Notes ● In the case when the menu function of this unit is identical to the remote control unit, the switch function of the remote control will override that of this unit. ● FOCUS and ZOOM cannot be adjusted using the remote control unit. ● When connected to RM-LP55, even if the "V.SCAN" under "SHUTTER" item is set to 1/60.0, the camera will operate based on 1/60.1. As such, the image level will change if the "STEP" mode under "SHUTTER" item is changed from NORMAL (1/60) to "V.SCAN". 44