JVC KY-F560U KY-F560U Multi-purpose camera 48 page instruction manual - Page 18

3. Setting and Adjustment During Shooting External Monitor Adjustment Display the built-in color bars signal at the camera on the monitor to perform color/contrast/brightness adjustment. 2., 9. [BARS] button AW BARS MENU SET REMOTE LENS GENLOCK IN VIDEO OUT DC IN POWER SEE INSTRUCTION MANUAL 1. 1. Connect the color video monitor to the [VIDEO OUT] of this unit. 2. Press the [BARS] button to output the color bars signal (SMPTE-compliant color bars). 3. With the color bars displayed, turn [BLUE CHECK] at the moni- tor to ON. Screen turns into a monochrome of blue and color bars ap- pear as blue stripes. 4. Turn the [CHROMA] adjustment knob on the monitor and ad- just color bars 1 and 8, 7 and $ to the same brightness level. 5. With [BLUE CHECK] in the ON mode, turn the [PHASE] ad- justment knob on the monitor to adjust color bars 3 and 0, 5 and @ to the same brightness level. 6. If brightness of color bars 1 and 8, 7 and $ vary upon [PHASE] adjustment, repeat chroma adjustment as in step 4.. 7. Turn [BLUE CHECK] at the monitor to OFF and return to the normal screen (R, G and B are all displayed). 8. Adjust using the [BRIGHT] adjustment knob on the monitor such that color bars * and ( disappear and ) becomes vis- ible. 9. Upon completing the adjustment, press the [BARS] button again to return to the normal screen. 3.~8. 123 45 6 7 890AB C D EF G HIJ K 18 1: White 2: Yellow 3: Cyan 4: Green 5: Magenta 6: Red 7: Blue 8: Blue 9: Black 0: Magenta !: Black @: Cyan #: Black $: White %: Black ^: White &: Black