JVC KY-F70U KY-F70U Computer Imaging Camera Instructions (827KB) - Page 36

4. Basic operations (continued) Saving images from the memory to an MO disk It is possible to save images stored in the main unit memory to an MO drive connected via the SCSI terminal when in the FREEZE or PLAY mode. (To output to an MO drive connected to a PC, see Page 64 7. Connecting to a PC) Output in operation SEND MENU MODE @@ SCSI terminal @ SCSI @@@ REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN OPNOWE1R 2 3 4 Undefined SEE INSTRUCTION MANUAL Dip switches WR I T E TO MO OK ? OK : " MODE " CANCE L: " MENU " Output confirmation WR I T E TO MO OPER AT I O N Ⅵ Set to either the FREEZE or PLAY mode. 1. Check to make sure that dip switches 1 and 2 are set to OFF as shown in the diagram on the left. 2. Press the SEND button. WRITE TO MO OK? message will appear on the monitor connected to the MONITOR terminal. 3. To write to the MO, press the MODE button (to cancel, press the MENU button). While in operation, WRITE TO MO OPERATION will appear for approximately 3 seconds. 4. When data is successfully written to the MO, WRITE TO MO OK FILE NAME: F70 TIF will appear for approximately 3 seconds. (each Ⅺ indicates a number) 5. When data is not successfully written to the MO, one of the following error messages will appear for approximately 3 seconds. ERROR : SCSI (check the cable) ERROR : WRITE (write error) ERROR : FORMAT (format the disk) ERROR : DISK (bad MO disk) ERROR : DIRECTRY (directory error) ERROR : READ (read error) ERROR : MO (Other MO disk error) WR I T E TO MO OK F I L E NAME : F7 0 0 0 0 1.T I F Output completed E36