JVC KY-F70U KY-F70U Computer Imaging Camera Instructions (827KB) - Page 40

5. Various recording methods Recording a PC monitor Horizontal line noise will appear on the screen when attempting to record images on a PC monitor or display. To clear this noise, the main unit shutter speed must be adjusted with scan speed of the monitor. @@@@@@ 1. Press the MODE button to enter the REC mode (REC LED on), then lightly press the MENU button to display the REC quick menu screen. 2. Press the DOWN button to select SHUTTER, then press Bar SET (SHUTTER will be displayed in purple). PC monitor 3. Use the DOWN button to change the set value to V. SCAN, then press the SET button (SHUTTER will return to white). 4. Next, press the DOWN button to select SHUTTER SPEED, then press the SET button. - - - REC MENU ( QU I CK ) - - - AE LEVEL :0 I R I S LEVEL : 1 2 8 SHU T ERE SPEED : V. SCAN : 1 / 30 SENS I T I V I TY : S TEP LEVEL : I S O1 0 0 A LC MAX : I S O4 0 0 SEND PRI O RI TY : MO 5. Press either UP or DOWN to change the shutter speed. When a black bar can be seen on the screen: decrease the shutter speed by pressing the DOWN button. When a white bar can be seen on the screen: increase the shutter speed by pressing the UP button. REC quick menu screen 6. Press the SET button when the bar is at its minimum. MEMO At this time, pressing the MENU button will return the unit to its previous settings without confirming the changes. 7. Press the MENU button to return to the normal screen. MEMO • The vertical scan frequency differs depending on the PC type and the bar may not be completely cleared away. The frequency may also change depending on the software used. E40