JVC LT-37X688 Instructions - Page 40

Initial Setup Optical Out You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL, you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects digital channels. Initial Setup 2/2 π† √® π† √® Press the MENU button To "Initial Setup" To enter To "Optical Out" To select "PCM" or "DOLBY DIGITAL" Press the MENU button when finished Auto Shut Off Off Software Version Power Indicator High Optical Out PCM Quick Start-up Off Select Operate BACK Back MENU Exit Notes: • If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select PCM, it cannot output the sound from the speakers. • For connecting an amplifier using the optical output, see page 20. • You cannot output sound from your Optical Output connection if the audio source is from your HDMI device. Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories. Quick Start-up Quick Start-up allows you to lessen the time for the TV to turn on and ready for viewing. π† √® π† √® Press the MENU button To "Initial Setup" To enter To "Quick Start-up" To turn "On" or "Off" Press the MENU button when finished Note: • Standby power consumption is higher when you have this feature turned on. Initial Setup Auto Shut Off Software Version Power Indicator Optical Out Quick Start-up 2/2 Off High PCM Off Select Operate BACK Back MENU Exit 40