Kenwood DDX9705S User Manual - Page 31

USB, Connecting a USB device, USB Basic Operation, Disconnect the USB device, Usable USB device

Page 31 highlights

USB Connecting a USB device 1 Connect the USB device with the USB cable. (P.94) 2 Press the [HOME] button. 3 Touch . 4 Touch [USB]. (P.12) ÑÑDisconnect the USB device 1 Press the [HOME] button. 2 Touch a source other than [USB]. 3 Detach the USB device. ÑÑUsable USB device You can use a mass-storage-class USB device with this unit. The word "USB device" appearing in this manual indicates a flash memory device. ●●About the file system The file system should be the one of the following. • FAT16 • FAT32 • exFAT • NTFS NOTE • Install the USB device in the place where it will not affect safe driving. • You cannot connect a USB device via a USB hub and Multi Card Reader. • Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising from any erased data. USB USB Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switch the operation mode (P.85). Control screen 1 2 6 5 7 3 4 Open the drawer 7 5 Close the drawer 6 5 7 8 1 [CODEC / ] / [ ] • When a high-resolution source is played, its format information is displayed. • [ ] : Repeats the current track/folder. Each time you touch the key, repeat modes are switched in the following sequence: File repeat ( ), Folder repeat ( ), Repeat all ( ) • [ ] : Randomly plays all tracks in the current folder. Each time you touch the key, random modes are switched in the following sequence: File random ( ), Random off ( ) English 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

USB
31
English
USB
Connecting a USB device
1
Connect the USB device with the USB
cable.
(P.94)
2
Press the
[
HOME
]
button.
3
Touch
.
4
Touch
[
USB
]
.
(P.12)
Ñ
Disconnect the USB device
1
Press the
[
HOME
]
button.
2
Touch a source other than
[
USB
]
.
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
About the file system
The file system should be the one of the
following.
• FAT16
• FAT32
• exFAT
• NTFS
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
USB Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see
Switch the
operation mode (P.85)
.
Control screen
7
4
3
5
2
1
6
Open the drawer
5
7
Close the drawer
5
7
6
8
1
[
CODEC /
]
/
[
]
• When a high-resolution source is played, its
format information is displayed.
[
]
: Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat (
), Folder repeat (
), Repeat
all (
)
[
]
: Randomly plays all tracks in the current
folder. Each time you touch the key, random
modes are switched in the following sequence:
File random (
), Random off (
)