Kenwood TH-D74A User Manual - Page 121
Wireless Control (th-d74a Only), Preparation, Control Operation
View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
25 WIRELESS CONTROL (TH-D74A ONLY) If you also have a KENWOOD multi-band mobile transceiver, you can control one of its bands by sending DTMF tones from this handy transceiver. You will find this function useful when you want to control your mobile transceiver from a location outside your vehicle. Note: ◆◆ You can remotely control only mobile transceivers that have both the secret number and Remote Control functions. ◆◆ FCC rules permit you to send control codes only on the 440 MHz band. PREPARATION Let us assume the VHF band of the mobile transceiver will be controlled. On the TH-D74A: 1 Access Menu No. 946. The current secret access code number appears. 2 To change the secret number, press the numeric keys (0 to 9) to enter a 3-digit number. On the mobile transceiver: 1 Set the ID code to the same secret number you set on the handy transceiver. • For the method, refer to the instruction manual for the mobile transceiver. 2 Select the receive frequency on the UHF band. • Match this frequency with the transmit frequency of the handy transceiver. 3 Enter the transceiver's Remote Control mode. • For the method, refer to the instruction manual for the mobile transceiver. If it is not described, consult your authorized KENWOOD dealer, customer service, or service center. CONTROL OPERATION 1 Press and hold [PTT]. 2 While transmitting, press [ENT]. • The last called DTMF Memory channel number. 3 While still transmitting, press [ ]/[ ] or rotate the [ENC] control to select your desired remote control number (RM0 ~ RM#), then press [ENT] to transmit DTMF code. Note: ◆◆ If using a handheld without a remote control function, manually send "AXXX#YA#" where "XXX" is a 3-digit secret number and "Y" is a single-digit control command. If you do not add "A#" to the end, you can skip sending "AXXX#" next time; however, the mobile may be accidentally controlled by other stations. Remote control number RM0 RM1 RM2 RM3 RM4 RM5 RM6 RM7 RM8 RM9 RMA RMB RMC RMD RM RM# Memory name Operation LOW Transmit power (ex. press to toggle between High, Medium, and Low) DCS ON (TM-D710/G, TS-2000) On Revers ON (TM-V7, TM-D700) Tone Alert ON (other models) TONE On Tone ON CTCSS On CTCSS ON DCS OFF (TM-D710/G, TS-2000) Off Revers OFF (TM-V7, TM-D700) Tone Alert OFF (other models) TONE Off Tone OFF CTCSS Off CTCSS OFF CALL Call mode ON VFO VFO mode ON MR Memory mode ON Frequency (in VFO mode) or Memory Freq. Enter channel (in Memory mode) direct entry Tone Select DCS code (when DCS is ON), Tone frequency (when Tone is ON), or CTCSS frequency (when CTCSS is ON) setup REPEATER Repeater (Cross-band or Locked- On band) ON REPEATER Off Repeater OFF DOWN Step the frequency or Memory channel down UP Step the frequency or Memory channel up 25-1