Kenwood TH-D74A User Manual - Page 42
Time-out Timer, Microphone Sensitivity, Setting Receiving Filters, Ssb High Cut, Cw Bandwidth
View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TIME-OUT TIMER The Time-out Timer limits the duration you transmit. Just before the transceiver stops the transmitting, a warning beep sounds. This function is necessary to protect the transceiver from thermal damage and can therefore not be turned OFF. 1 Access Menu No. 111. SETTING RECEIVING FILTERS Reduce interference and noise in SSB mode, CW mode, and AM mode to make the received sound easier to hear. SSB High Cut 1 Press [MODE] to set SSB mode in band B. 2 Access Menu No. 120. 2 Select [0.5], [1.0], [1.5], [2.0], [2.5], [3.0], [3.5], [4.0], [4.5], [5.0], or [10.0] minutes. MICROPHONE SENSITIVITY Change the microphone input sensitivity. The microphone input sensitivity setting applies to both the internal microphone and an external microphone. 1 Access Menu No. 112. 3 Select [2.2], [2.4], [2.6], [2.8], or [3.0] kHz ranges. Low cut is fixed to 200 Hz. CW Bandwidth 1 Press [MODE] to set CW mode in band B. 2 Access Menu No. 121. 2 Select [Low], [Medium], or [High]. 3 Select [0.3], [0.5], [1.0], [1.5], or [2.0] kHz ranges. The center of the filter is the pitch frequency. AM High Cut 1 Press [MODE] to set AM mode in band B. 2 Access Menu No. 122. 3 Select [3], [4.5], [6.0], or [7.5] kHz ranges. Low cut is fixed to 200 Hz. 12-4