KitchenAid KEBS209BSS Use & Care Guide - Page 14

Convection Broil (on some models) A B Before second proofing, shape dough, place in baking pan(s) and cover loosely with plastic wrap coated with cooking spray. Follow same placement, and control steps above. Before proofing, remove plastic wrap. Temperature Probe (single, upper and, on some models, lower oven) WARNING A. Broil heat B. Convection fan During convection broiling, the broil element will cycle on and off in intervals to maintain oven temperature, while the fan circulates the hot air. The temperature is preset at 550°F (288°C), but can be changed to a different temperature. Cooking times will vary depending on the rack position and temperature and may need to be adjusted. If the oven door is opened during convection broiling, fan turns off immediately when the door is opened and turns on again immediately when the door is closed. Broil elements will turn off approximately 30 seconds after the door is opened. They will turn on again approximately 30 seconds after the door is closed. To Convection Broil: Allow the oven to preheat for 5 minutes. Position food on the unheated grid on the broiler pan, then place it in the center of the oven rack with the longest side parallel to the door. Close the door. 1. On double ovens only, touch UPPER OVEN or, on some models, LOWER OVEN. The cavity symbol indicates which oven was chosen. 2. Touch CONVECT BROIL. Touch the number keys to enter a temperature other than 550°F (288°C). The convection broil range can be set between 450°F and 550°F (232°C and 288°C). 3. Touch START. The set oven temperature will appear on the oven display until oven is turned off. 4. Touch CANCEL for the selected oven when finished cooking. Proofing Bread Proofing bread prepares dough for baking by activating the yeast. Proofing twice is recommended unless the recipe directs otherwise. To Proof: Before first proofing, place dough in a lightly greased bowl and cover loosely with wax paper coated with shortening. Place on rack guide 2, then place broiler pan on guide 1. See "Positioning Racks and Bakeware" for diagram. Close door. 1. On double ovens only, touch UPPER OVEN or LOWER OVEN. The cavity symbol will indicate which oven was chosen. 2. Touch BREAD PROOF. Display will show 100°F (38°C). 3. Touch START. Let dough rise until nearly doubled in size, check at 20 to 25 minutes. Proofing time may vary depending on dough type and quantity. 4. Touch CANCEL for the selected oven when finished cooking. Burn Hazard Use an oven mitt to remove temperature probe. Do not touch broil element. Failure to follow these instructions can result in burns. The temperature probe accurately measures the internal temperature of meat, poultry and casseroles with liquid and should be used in determining the doneness of meat and poultry. The temperature probe should only be used with Bake, Convect Bake or Convect Roast. Always unplug and remove the temperature probe from the oven when removing food. To Use: Before using, insert the probe into the food item. (For meats, the probe tip should be located in the center of the thickest part of the meat and not into the fat or touching a bone). Place food in oven and connect the temperature probe to the jack. Keep probe as far away from heat source as possible. Close oven door. NOTE: The temperature probe must be inserted into the food item before the mode is selected. 1. On double ovens only, touch UPPER OVEN or LOWER OVEN. This step is necessary only if a meat probe is plugged into the upper and lower cavity at the same time. If only 1 meat probe is used, cavity focus is automatically switched to the oven that the meat probe is plugged into. 2. Touch the number keys to enter a probe temperature. The probe temperature is the desired internal temperature of the food when it is done. The temperature can be set between 110°F and 200°F (43°C and 93°C). 3. Touch BAKE, CONVECT BAKE or CONVECT ROAST. Touch number keys to enter an oven temperature other than the one displayed. The oven temperature is the temperature given in the recipe. 4. Touch START. The set oven temperature will appear on the oven display throughout cooking. "Lo°" will appear as the probe temperature until the internal temperature of the food reaches 45°F (7°C). Then the display will show the temperature increasing. When the set probe temperature is reached, the oven will shut off automatically and "Cooking Complete" will appear on the oven display. If enabled, end-of-cycle tones will sound, then reminder tones will sound every minute. 14