KitchenAid KUDF204KPA Owners Manual - Page 12
Care And Cleaning
View all KitchenAid KUDF204KPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
power consumption. If you do not need the ice making (including not automatically supplying water), you should turn OFF the ice maker. (The indicator light will dim). Water Filtration System: With the filter cap in the vertical position, insert the new filter into the base grille until it stops. Rotate the cartridge cap clockwise to a horizontal position. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Water Filter Indicator/Reset Filter: The water filter indicator light will help you know when to change your water filter. The indicator light will change from dark to yellow when it is time to order a new filter. The indicator light will then change from yellow to red when it is time to replace the water filter. The disposable water filter should be replaced at least every 6 months. After replacing the water filter, reset the water filter indicator. Press and hold RESET FILTER for 3 seconds. The indicator light will turn Off. NOTE: These features will not appear on your control unless you need to order or replace your filter. Using the Ice Maker without the Water Filter: You can run the ice maker without a water filter. Your water will not be filtered. Slide the filter cap off the end of the water filter. With the filter cap in the horizontal position, insert the cap into the base grille until it stops. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with a replacement filter. CARE AND CLEANING Cleaning Changing the Water Filter: The water filter is located through the base grille. You do not have to remove the base grille in order to change the water filter. 1. Locate the water filter cap in the front base grille. Rotate the cap counterclockwise to a vertical position and pull the cap and water filter out through the base grille. NOTE: There will be water in the filter. Some spilling may occur. 2. Remove the filter cap by sliding it off the end of the old filter. The cap will slide to the left or right. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter. 3. Take the new water filter out of its packaging and remove the cover from the O-rings. Explosion Hazard Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost refrigerator. Do not puncture refrigerant tubing. Clean the double drawer once a month to avoid buildup of odors. Wipe up spills immediately. To clean your Double Drawer: 1. Unplug double drawer or disconnect power. 2. Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water. To avoid damaging wooden tines and trim pieces, wipe them off with a clean sponge or soft cloth and warm water. Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials. 4. Slide the filter cap onto the new water filter. See the illustration in Step 2. To help remove odors, you can wash interior walls with a mixture of warm water and baking soda [2 tbs to 1 qt (26 g to 0.95 L) of water]. 12 05-May-2021 10:43:59 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")