KitchenAid KUDF204KPA Owners Manual - Page 4
Product Dimension
View all KitchenAid KUDF204KPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Bed and breakfast type environments; Catering and similar non-retail applications. NOTES: For the double drawer to be flush with the front of the base cabinets, remove any baseboards or moldings from the rear of the opening. See "Product Dimensions" and later in this section, "Opening Dimensions." It is recommended that you do not install the double drawer near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55 °F (13 °C). For best performance, do not install the refrigerator drawers behind a cabinet door or block the base grille. Opening dimensions: Height dimensions are shown with the leveling legs extended to the minimum height. NOTE: When leveling legs are fully extended, add 5/8" (1.5 cm) to the height dimensions. See "Product Dimensions." If the floor of the opening is not level with the kitchen floor, shim the opening to make it level with the kitchen floor. For flush installation, the power outlet can be installed in adjacent cabinetry with a cutout on the power cord side for routing of the power cord. The power outlet can also be recessed on the back wall behind the unit as per recommended receptacle locations in the above illustration. Product Dimension Drawer height dimensions: Height dimensions are shown with the leveling legs extended to 1/4" (0.63 cm) below the refrigerator drawers. When leveling legs are fully extended to 1" (2.54 cm) below the refrigerator drawers, add 3/4" (1.9 cm) to the height dimensions. The power cord is 60" (152.4 cm) long. Style 1- Stainless steel (front view) G I Recessed receptacle F locations 1/4" (0.63 cm) C G EH F D Utility opening 15" (38.1 cm) 301/8" (76.6 cm) 15" (38.1 cm) 341/8" (86.8 cm) B A Style 2 - Overlay (front view) Opening and utility location dimensions Opening width - A Opening depth - B Opening height - C Dimension - D Dimension - E Dimension - F Dimension - G Dimension - H Dimension - I 24" (60.96 cm) min. 24" (60.96 cm) min. 341/2" (87.6 cm) min. 35" (88.9 cm) max. 121/16" (30.64 cm) 213/4" (55.24 cm) 13/4" (4.44 cm) 3" (7.62 cm) 41/2" (11.43 cm) 91/4" (23.49 cm) 1/4" (0.63 cm) 15" (38.1 cm) 301/8" (76.6 cm) 15" (38.1 cm) 341/8" (86.8 cm) 4 05-May-2021 10:43:59 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")