Kodak DP1100 Reference Manual - Page 21
Connecting a Desktop Computer
View all Kodak DP1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting up the Projector Connecting a Desktop Computer 1. Locate the cable that connects your monitor to your computer. Unplug it from the computer. Note: If you are connecting an older MACINTOSH computer that does not have a 15-pin connector, you must use the Mac adaptor between the computer and the cable hub. 2. Plug the end of the cable hub into the monitor connector on your computer. Figure 7 Connecting to a desktop computer Do you want to display the image on your computer's monitor as well as on the projection screen? Note: The projector must be turned on to display the image on your monitor. 1. Plug your monitor's cable into the cable hub. connector on the Do you want to play your computer's audio on the projector? 1. Unplug the audio cable, if present, from your computer. 2. Plug either end of the audio cable into the audio connector on your computer. 3. Plug the other end of the audio cable into the connector on the cable hub. 3/99 17