Kodak DP1100 Reference Manual - Page 52

Troubleshooting

Get Kodak DP1100 - Digital Projector PDF manuals and user guides View all Kodak DP1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Reference Manual KODAK DP900 / DP1100 Troubleshooting Problem: Nothing on projection screen • Make sure that the power cord is properly connected to a fully functional AC electrical outlet. Make sure that the power cord is also properly connected to the projector. • If the projector is plugged into a power strip, make sure the power strip is turned on. • Make sure you have removed the lens cap on the projection lens at the front of the projector. • Make sure the projector is switched on. • Check the projector's lamp to ensure that it is securely connected in the lamp module. See "Replacing the Projection Lamp" on page 46. • Make sure that the cables do not have any bent pins. Problem: Color or text not being projected • You might need to adjust the brightness up or down until the text is visible. Refer to "Brightness" on page 32 for more information. Problem: The screen resolution is not right • Make sure the computer's video card is set for a resolution of no greater than 1024x768. Problem: Image isn't centered on the screen • Reposition the image. Refer to "Horizontal position" on page 36 and "Vertical position" on page 37. • Be sure the projector is at a 90 degree angle to the screen. 50 3/99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Reference Manual KODAK DP900 / DP1100
50
3/99
Troubleshooting
Problem: Nothing on projection screen
•
Make sure that the power cord is properly connected to
a fully functional AC electrical outlet. Make sure that
the power cord is also properly connected to the
projector.
•
If the projector is plugged into a power strip, make sure
the power strip is turned on.
•
Make sure you have removed the lens cap on the
projection lens at the front of the projector.
•
Make sure the projector is switched on.
•
Check the projector’s lamp to ensure that it is securely
connected in the lamp module. See “Replacing the
Projection Lamp” on page 46.
•
Make sure that the cables do not have any bent pins.
Problem: Color or text not being projected
•
You might need to adjust the brightness up or down
until the text is visible. Refer to “Brightness” on
page 32 for more information.
Problem: The screen resolution is not right
•
Make sure the computer’s video card is set for a
resolution of no greater than 1024x768.
Problem: Image isn’t centered on the screen
•
Reposition the image. Refer to “Horizontal position”
on page 36 and “Vertical position” on page 37.
•
Be sure the projector is at a 90 degree angle to the
screen.