Kodak DP1100 Reference Manual - Page 42
Plug and Play, Display Messages, Display Startup Screen
View all Kodak DP1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Using the Projector Plug and Play This setting toggles between On and Off. When it is On, most new computers will automatically recognize the projector, then set the monitor resolution and refresh rate accordingly. You need to set the Plug and Play setting to Off for the projector to display properly on some older computers. The Plug and Play setting does not affect video images. If the projector's display constantly changes between the computer image and the message, "Perfecting the image", you may need to set Plug and Play to Off. Display Messages This setting toggles between On and Off. When this feature is On, status messages such as "No signal detected" or "Standby Active" appear in the lower-right corner of the screen. Click either mouse button to turn this feature off and not see status messages. Display Startup Screen This setting toggles between On and Off. When this feature is On, the Kodak startup screen appears when the projector starts up and remains until an active source is detected. Click either mouse button to turn this feature off and display a plain black or blue screen instead of the startup screen. 3/99 39