Kodak DP1100 Reference Manual - Page 33
Mouse buttons, Source keypad only, or Computer and, Video remote only, Standby, Volume keypad only
View all Kodak DP1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Reference Manual KODAK DP900 / DP1100 Menu Press to open the on-screen menus (the keypad lights green). Press again to close the menus. When you close the menus, the projector saves any changes you made. For more information about the on-screen menus, see page 31. Mouse buttons Use the left and right mouse buttons to make selections and adjustments in the menus. See "Using the On-Screen Menus" on page 31 for details. Source (keypad only) Video (remote only) or Computer and When you have more than one source (computer and video) connected to the projector, select between them by pressing the source button on the keypad or the Computer or Video button on the remote. Standby When you press , the display and audio turn off and a blank screen is displayed for 15 minutes. You can change the amount of time the projector stays in standby mode; see "Standby Time" on page 38 for details. • If you press again within 15 minutes, the projector returns to normal operations immediately. • If you press again after 15 minutes, there is about a 30 second delay before the lamp turns back on. • If you don't press again, the lamp turns off after 15 minutes. Volume (keypad only) • To increase the volume, press • To decrease the volume, press Volume adjustments are saved for each source connected. 30 3/99