Kodak DP1100 Reference Manual - Page 54

Problem: the projector displays vertical lines

Get Kodak DP1100 - Digital Projector PDF manuals and user guides View all Kodak DP1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Reference Manual KODAK DP900 / DP1100 Problem: Image is too wide or narrow for screen • You might need to manually adjust the tracking to reduce or enlarge the projected image. Refer to "Manual Tracking" on page 36. • Adjust the resolution of your video card if it's greater than 1024x768. Problem: Image is out of focus • Turn the projection lens to focus the image. • Make sure the projection screen is at least 5 feet (1.5 m) from the projector. • Check the projection lens to see if it needs cleaning. Problem: Image and menus are reversed left to right • Rear projection mode is probably turned on. Turn Rear Projection off in the Controls menu. The image should immediately return to forward projection. See "Rear Projection" on page 38. Problem: the projector displays vertical lines, "bleeding" or spots • Adjust the brightness. See "Brightness" on page 32. • Check the projection lens to see if it needs cleaning. Problem: no sound • Adjust volume. • Verify audio/input connections. • Adjust audio source. 52 3/99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Reference Manual KODAK DP900 / DP1100
52
3/99
Problem: Image is too wide or narrow for screen
•
You might need to manually adjust the tracking to
reduce or enlarge the projected image. Refer to
“Manual Tracking” on page 36.
•
Adjust the resolution of your video card if it’s greater
than 1024x768.
Problem: Image is out of focus
•
Turn the projection lens to focus the image.
•
Make sure the projection screen is at least 5 feet
(1.5 m) from the projector.
•
Check the projection lens to see if it needs cleaning.
Problem: Image and menus are reversed left to
right
•
Rear projection mode is probably turned on. Turn Rear
Projection off in the Controls menu. The image should
immediately return to forward projection. See “Rear
Projection” on page 38.
Problem: the projector displays vertical lines,
“bleeding” or spots
•
Adjust the brightness. See “Brightness” on page 32.
•
Check the projection lens to see if it needs cleaning.
Problem: no sound
•
Adjust volume.
•
Verify audio/input connections.
•
Adjust audio source.