Kodak DP1100 Reference Manual - Page 53
Problem: Only the start-up screen displays
View all Kodak DP1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Maintenance & Troubleshooting Problem: Only the start-up screen displays • Verify that the cables are connected correctly. See page 13 through page 20 for connection procedures. • Verify that the proper input source is connected. See "Source (keypad only) or Computer and Video (remote only)" on page 30. • You might need to turn everything off and power up the equipment again in the proper order. Refer to your computer's documentation to determine the correct order. • Make sure your laptop's external video port is turned on. See the "Using Video Mirroring with a PowerBook Computer" on page 71 or your computer's manual for details. • Make sure your computer's video board is installed and configured correctly. If you're using Windows 3.x: 1. In the Windows Program Manager, double-click the Windows Setup icon in the Main program group. 2. Verify that the Display setting is 1024x768 or less. If you're using Windows 95: 1. Open the "My Computer" icon, the Control Panel folder, and then the Display icon. 2. Click the Settings tab. 3. Verify that the Desktop area is set to 1024x768 or less. 4. Also check the following: • Does your computer have a compatible video board? The projector isn't CGA or EGA compatible. • Is your computer's video port activated? This is especially true for laptop computers. See "Portable and Laptop Activation Chart" on page 61. 3/99 51