Konica Minolta bizhub 4752 bizhub 4752/4052 Quick Start Guide - Page 82
Introduction of copy function, Using the copy function, Reset, Keypad, Touch Panel, Start
View all Konica Minolta bizhub 4752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
6.4 Using the copy function 6 4 If necessary, configure copy settings. % The setting change is reflected on the image of [Output]. Therefore, you can configure the settings while checking the output image. % To reconfigure settings, press the Reset key. Basic Usage Chapter 6 % For details on copy settings, refer to page 6-15. 5 If necessary, specify the number of copies using the Keypad. % Tapping [No. of Sets] displays the Keypad. % Pressing the 10 Keypad key (default: Register key 3) displays the Keypad on the Touch Panel, en- abling you to enter numeric values. % To change the number of copies, tap [C] (Clear). 6 Press the Start key. % If desired, tap [Check Setting] before starting a copy, and check the settings. The original is scanned and copy begins. % If you press the Stop key while scanning or printing an original, processing is stopped, and a list of inactive jobs is displayed. To cancel the operation, delete the stopped jobs from the list. % If [Ready to accept another job.] appears while printing a job, you can scan the next original. 6.4.2 Introduction of copy function This section describes the convenient copy functions. For details on how to use each function, refer to [Copy] in the User's Guide CD. Function [Interrupt] Proof Copy [Density] Overview If you urgently want to make a copy, even if the machine is printing an original, you can interrupt the active job and make an intruder copy. Before beginning actual copying, do a single test copy and check it is acceptable. When making a large number of copies, use the proof copy function to prevent a large number of copy errors from occurring. Adjust the density of a copy image. bizhub 4752/4052 6-15