Konica Minolta bizhub C3100P bizhub C3100P Maintenance/Troubleshooting User Gu - Page 30
Replacing the Transfer Belt Unit, Replacing consumables, Right Door, Transfer Belt Unit
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2.2 Replacing consumables 2 6 While holding down the roller, press it inward until it clicks. 7 Close the Right Door. 8 Select [UTILITY] - [ADMIN SETTINGS] - [LIFE] - [REPLACE] - [TRANS. ROLLER], then reset the counter. 2.2.5 Replacing the Transfer Belt Unit After the Transfer Belt Unit replacement message has appeared, printing is possible, but the printing quality reduces. Immediately replace the Transfer Belt. 1 Turn the power of this machine off, then disconnect the power cable and interface cable. 2 Open the Front Door. [Maintenance/Troubleshooting] 2-17
[Maintenance/Troubleshooting]
2-17
2.2
Replacing consumables
2
6
While holding down the roller, press it inward until it clicks.
7
Close the
Right Door
.
8
Select [UTILITY] - [ADMIN SETTINGS] - [LIFE] - [REPLACE] - [TRANS. ROLLER], then reset the counter.
2.2.5
Replacing the Transfer Belt Unit
After the
Transfer Belt Unit
replacement message has appeared, printing is possible, but the printing quality
reduces. Immediately replace the Transfer Belt.
1
Turn the power of this machine off, then disconnect the power cable and interface cable.
2
Open the
Front Door
.