Konica Minolta bizhub C3100P bizhub C3100P Maintenance/Troubleshooting User Gu - Page 42

When a paper jam has occurred, 3.2.1 Paper jam message screen

Page 42 highlights

3.2 When a paper jam has occurred 3 3.2 When a paper jam has occurred To prevent a failure, carefully remove jammed paper so that it does not tear. Even if only a large or small slip of paper is left in this machine, it will cause a paper feed failure, resulting in a paper jam. 7CAUTION - A print image is not fused before it is processed in the fuser unit. If you touch the print side, your hand may become stained with toner. When removing jammed paper, be careful not to touch the print side. Also, do not spill toner inside this machine. - Toner that is not fused may stain your hand or clothes. If your clothes become stained with toner, try to clean off as much as you can. If a stains remain on your clothes, wash with cool water, not hot water. If your skin is stained with toner, wash with water or neutral detergent. - If any toner enters your eyes, immediately wash them with cool water, then contact your doctor. 3.2.1 Paper jam message screen If a paper jam occurs on this machine, a message notifying that a paper jam has occurred is displayed in the Message Window. Tips If a paper jam message remains displayed after a paper jam has been cleared, open and close the door of this machine. 3.2.2 Clearing a paper jam in the Manual Feed Tray or Transfer Roller CAUTION High temperature! The area around the fuser unit is hot. To avoid a burn injury, be careful not to touch any parts except for the specified knob and dial. In case your hand or any other part of your body comes in contact with the heated section, immediately run it under cold water and seek medical assistance. CAUTION High temperature! [Maintenance/Troubleshooting] 3-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

[Maintenance/Troubleshooting]
3-3
3.2
When a paper jam has occurred
3
3.2
When a paper jam has occurred
To prevent a failure, carefully remove jammed paper so that it does not tear. Even if only a large or small slip
of paper is left in this machine, it will cause a paper feed failure, resulting in a paper jam.
7
CAUTION
-
A print image is not fused before it is processed in the fuser unit. If you touch the print side, your hand
may become stained with toner. When removing jammed paper, be careful not to touch the print side.
Also, do not spill toner inside this machine.
-
Toner that is not fused may stain your hand or clothes. If your clothes become stained with toner, try
to clean off as much as you can. If a stains remain on your clothes, wash with cool water, not hot water.
If your skin is stained with toner, wash with water or neutral detergent.
-
If any toner enters your eyes, immediately wash them with cool water, then contact your doctor.
3.2.1
Paper jam message screen
If a paper jam occurs on this machine, a message notifying that a paper jam has occurred is displayed in the
Message Window
.
Tips
If a paper jam message remains displayed after a paper jam has been cleared, open and close the door of
this machine.
3.2.2
Clearing a paper jam in the Manual Feed Tray or Transfer Roller
CAUTION
High temperature!
The area around the fuser unit is hot. To avoid a burn injury, be careful not to touch any parts except for the
specified knob and dial. In case your hand or any other part of your body comes in contact with the heated
section, immediately run it under cold water and seek medical assistance.
CAUTION
High temperature!