Konica Minolta bizhub C3110 bizhub C3110 Description of Utility Keys - Page 24
Expert Adjustment]
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
6.1 [System Settings] 6 [Expert Adjustment] To display: [UTILITY] - [Admin Settings] - [System Settings] - [Expert Adjustment] Correct a defective print image. Settings [ALIGNMENT] [TOP ADJUSTMENT] [LEFT ADJUSTMENT] [LeadEdgeAdj Side2] [LEFT ADJ DUPLEX] [Media Adjustment] [Cal Setting] [IMAGE ADJ PARAM] [IMG ADJ THICK] [IMG ADJ BLACK] [MAIN SCAN ADJUST] [Main Scan Page] [Fine Line ADJ] [PRINT MENU] [Event Log] [HALFTONE 64] [HALFTONE 128] [HALFTONE 256] [Gradation] Description Adjust the print start position and defective print images. Select the type of the paper (plain paper, Thick 1, Thick 2, or envelope) you want to adjust the printing position for. Adjust the print start position at the leading edge of the paper relative to the paper discharge direction for each paper type. [0] is specified by default. Select the paper tray for adjusting the printing position. Adjust the print start position at the left-hand edge of the paper relative to the paper discharge direction for each paper tray. [0] is specified by default. Select the type of the paper (plain paper, Thick 1, or Thick 2) you want to adjust the printing position for. Adjust the print start position at the leading edge of the back side of the paper relative to the paper discharge direction for printing the back side during 2-sided printing, for each paper type. [0] is specified by default. Select the paper tray for adjusting the printing position. Adjust the print start position at the left-hand edge of the paper relative to the paper discharge direction for printing the back side during 2-sided printing, for each paper tray. [0] is specified by default. Adjust print defects (voids, white spots, roughness) that are caused by paper properties for each paper type. • [First Side]: Select this option if defective images are found on the front side of 1-sided or 2-sided printing. Select the paper type to adjust a defective image. • [Second Side]: Select this option if defective images are found on the back side of 2-sided printing. Select the paper type to adjust a defective image. Copy or print after configuration, then repeat adjustments, if necessary. Change the image stabilization type and execution timing. • [Black & White Priority]: Monochrome image stabilization is controlled if a change in absolute humidity is detected during warm-up. In addition, color image stabilization is controlled before color printing. • [Standard]: Color image stabilization is controlled if a change in absolute humidity is detected during warm-up. [Standard] is specified by default. Adjust the parameter to adjust the image. [0] is specified by default. Adjust the image density for each printing color when printing on thick paper or at 1200 dpi. The larger the number, the darker the background. [0] is specified by default. Adjust the density of an image to be printed in black and white. The larger the number, the darker the background. [0] is specified by default. Adjust the zoom ratio in the main scanning direction for each color. [0] is specified by default. Print a test pattern to adjust the zoom ratio in the main scanning direction. Adjust the parameter to adjust thin lines (maintenance). [0] is specified by default. Print error log information or halftone patterns. Print event logs such as error logs or consumable replacement histories. Print a halftone pattern of density 25% for each color. Print a halftone pattern of density 50% for each color. Print a halftone pattern of density 100% for each color. Print a gradation pattern. [Description of Utility Keys] 6-4