Konica Minolta bizhub C360 bizhub C220/C280/C360 Network Administrator User Gu - Page 168
IEEE802.1x Authentication Setting]
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
8.10 Using IEEE802.1X authentication 8 8.10.3 [IEEE802.1x Authentication Setting] In the administrator mode of PageScope Web Connection, select [Network] ö [IEEE802.1x Authentication Setting] ö [IEEE802.1x Authentication Setting]. Item [Authentication Status] [IEEE802.1x Authentication Setting] [Supplicant Setting] [User ID] [Password is changed.] [Password] [EAP-Type] Description The authentication status is shown as follows. • [Authenticated]: The authentication has completed. • [Authenticating]: The authentication is in progress. • [Unauthenticated]: Not authenticated status. • [Authentication Failed]: The authentication has failed. • [Failed to Retrieve Status]: No authentication status could be obtained. When you press [Refresh], the authentication status is updated. Select [ON]. Prior check Configure settings required in order for this machine, which is a supplicant (authentication client), to receive authentication from the authentication server. Configure settings to fit your environment. Enter a user ID (up to 128 characters). This user ID is used for all EAP-Type options. Select this check box to change the password. Enter the password (up to 128 characters). The password is used for all EAP-Type options other than [EAP-TLS]. Select an EAP authentication method. If you select [Depend on Server], the EAP-Type provided by the authentication server will be used for authentication. Configure the supplicant settings as required for this machine according to the EAP-Type provided by the authentication server. Do not set this item to [OFF]. EAP authentication method bizhub C360/C280/C220 8-30