Konica Minolta bizhub C360 bizhub C220/C280/C360 Network Administrator User Gu - Page 84
In Print Server mode using the NetWare 4.x Bindery Emulation, In NetWare 4.x Remote Printer mode NDS
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
5.7 Printing (Netware) 5 Item [IPX Setting] [Ethernet Frame Type] [NetWare Print Mode] [Print Server Name] [Printer Number] Description Select [ON]. Select a frame type to be used. Select [Nprinter/Rprinter]. Enter a print server name to be operated as the Nprinter/Rprinter (up to 63 characters, excluding Enter the Nprinter/Rprinter number. Prior check Frame type The print server name specified in Step 4 In Print Server mode using the NetWare 4.x Bindery Emulation 0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the NetWare server. 0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server. 1 From the client, log in the NetWare file system as Bindery with the administrator authority. 2 Start Pconsole. 3 Select [Quick Setup] from [Available Options] list box, and press the Enter key. 4 Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth- er/Unknown], and save them. 5 Terminate Pconsole by pressing the Esc key. Then, configure the following settings in [NetWare Setting]. Item [IPX Setting] [Ethernet Frame Type] [NetWare Print Mode] [Print Server Name] [Print Server Password] [Polling Interval] [Bindery/NDS Setting] [File Server Name] Description Select [ON]. Select a frame type to be used. Select [PServer]. Enter a print server name to be operated as Pserver (up to 63 characters, excluding Enter a print server password if necessary (up to 63 characters). Set a job inquiry interval. Select [NDS/Bindery Setting]. Enter the priority file server name to be used in the Bindery emulation mode (up to 47 characters, excluding Prior check Frame type The print server name specified in Step 4 In NetWare 4.x Remote Printer mode (NDS) 1 From the client, log in the NetWare file system with administrator authority. 2 Start NWAdmin. 3 Select an organization or department container for the print service, and select [Print Services Quick Setup] from the Tools menu. 4 Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the [Type] of the printer to [Other/Unknown] and save them. bizhub C360/C280/C220 5-13