Konica Minolta bizhub C360 LK-101/LK-102/LK-103/LK-105 License Authentication - Page 5

for Customer Engineer License Operations When you start, stop or repair using the license activation base functions, those operations, Activation, Deactivation, Repair or Initialization, have to be made as you intended. There are 4 types of License Operations. — License Operations z Activation This is the operation to enable License Activation Base Functions and make the functions operational. It is possible to execute this operation in Administrator Mode or Service Mode. z Deactivation This is the operation to invalidate the activated License Activation Base Functions. It is possible to execute this operation in Service Mode. z Repair It is necessary to execute this operation when the error of license management state is displayed on the control panel. If it occurs, the License Activation Base Functions are temporarily disabled. To recover the condition, Repair operation has to be performed. It is possible to execute this operation in Service Mode. z Initialization Execute this operation when the error state is not resolved after performing Repair. Basically, execute Initialization only when the error of license management state occurs after performing Repair. When performing the operation, please confirm that the error of license management state occurs under what conditions (executed operations, parts replacement, setting change and so on). It is possible to execute this operation in Service Mode. Issued by BT-CSO 5 Ver 1.01