Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub C3850FS » Manual Viewer

Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Maintenance/Troublesh - Page 17

Replacement procedure, Replacing consumables, Yellow Toner Cartridge, Control Panel, Front Cover

View all Konica Minolta bizhub C3850FS manuals

Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

2.2 Replacing consumables 2 Replacement procedure The following example shows how to replace a Yellow Toner Cartridge. NOTICE Do not use a recycle Toner Cartridge other than our genuine product. A failure or problem that affects printing quality and that was caused due to use of a recycled Toner Cartridge is not covered by the warranty. Such a failure or problem is not subject to technical support. 1 Check the color of the exhausted toner in the message window of the Control Panel. 2 Open the Front Cover. 3 Pull the lever at the front left. YMC K 4 Hold the handle of the Toner Cartridge to be replaced, then pull out it. NOTICE When replacing the Toner Cartridge, be careful not to spill any toner. If toner has spilled, immediately wipe it off using a soft and dry cloth. 5 Check the color of the new Toner Cartridge. % To prevent toner from spilling, do not take the Toner Cartridge out of the bag until Step 4 is executed. [Maintenance/Troubleshooting] 2-4

Section	Page
Table of contents	2
1 Cleaning This Machine	5
1.1 Before getting started	5
1.2 Cleaning	7
1.2.1 Cleaning the outside of this machine	7
Control Panel	7
Exhaust Air Duct	7
Outer Covers	7
Original Glass	8
Original Cover Pad	8
1.2.2 Cleaning the Paper Feed Rollers	8
Cleaning the Paper Feed Rollers of the Manual Feed Tray	8
Cleaning the Paper Feed Unit of Tray 1/2/3	9
Cleaning the Transport Roller of Tray 2/3	9
Cleaning the Paper Feed Roller of the ADF	10
1.2.3 Cleaning the laser lenses	11
2 Checking and Replacing Consumables	15
2.1 Checking the status of consumables	15
Consumables replacement messages	15
Checking the consumable level	15
2.2 Replacing consumables	16
2.2.1 Replacing a Toner Cartridge	16
Handling a Toner Cartridge	16
Storing Toner Cartridges	16
Replacement procedure	17
2.2.2 Replacing an Imaging Unit	19
2.2.3 Replacing a Waste Toner Bottle	25
2.2.4 Replacing the Transfer Roller	27
2.2.5 Replacing the Transfer Belt Unit	29
2.2.6 Replacing a Toner Filter	35
2.2.7 Replacing a Fusing Unit	36
2.2.8 Replacing a Staple Kit SK-602	40
2.2.9 Replacing a Staple Kit SK-501	43
3 Clearing Paper Jam and Staple Jam	46
3.1 To prevent a paper jam	46
3.2 When a paper jam has occurred	47
3.2.1 Paper jam message screen	47
3.2.2 Clearing a paper jam in the Manual Feed Tray or Transfer Roller	47
Clear procedure	48
3.2.3 Clearing a paper jam in Tray 1	49
Clear procedure	49
3.2.4 Clearing a paper jam in Tray 2/3	51
3.2.5 Clearing a paper jam in the ADF	52
3.2.6 Clearing a paper jam in the Duplex Option	54
3.2.7 Clearing a paper jam in the Fusing Unit	55
Clear procedure	55
3.2.8 Clearing a paper jam in the Finisher (bizhub C3850FS only)	58
3.3 Troubleshooting for paper jam	59
3.4 Clearing a staple jam	61
3.4.1 Clearing a staple jam in the Staple Kit SK-501	61
3.4.2 Clearing a staple jam in the Staple Kit SK-602	63
4 Troubleshooting	66
4.1 The power is not turned on	66
4.2 The Touch Panel is not displayed	67
4.3 Cannot print	68
4.3.1 Cannot print	68
4.3.2 Problems on print quality	71
4.3.3 When the bit count does not match between the server and the client	72
4.4 Cannot perform network scanning	74
4.5 Cannot perform fax/internet fax	75
4.5.1 Cannot perform Fax TX	75
4.5.2 Cannot perform Fax RX	76
4.6 Cannot perform copy	77
4.7 Trouble in use of Finisher FS-P03	79
4.8 Trouble in use of Finisher (bizhub C3850FS)	80
4.9 Major messages and actions	81
Warning messages	81
Error messages	82
Service call	85
5 Checking Counters	87
5.1 Checking the counter	87