Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Maintenance/Troublesh - Page 80
Trouble in use of Finisher (bizhub C3850FS), Description of problem, Check points, Remedy
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
4.8 Trouble in use of Finisher (bizhub C3850FS) 4 4.8 Trouble in use of Finisher (bizhub C3850FS) Description of problem The device cannot be used due to a Finisher failure. Check points - Remedy Use of the device can be continued by temporarily isolating the Finisher from the device. Select [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Problem Unit Isolation Set.] to isolate the Finisher, then turn the device off and on. [Maintenance/Troubleshooting] 4-16
[Maintenance/Troubleshooting]
4-16
4.8
Trouble in use of Finisher (bizhub C3850FS)
4
4.8
Trouble in use of Finisher (bizhub C3850FS)
Description of problem
Check points
Remedy
The device cannot be
used due to a
Finisher
failure.
-
Use of the device can be continued by temporar-
ily isolating the
Finisher
from the device.
Select [Utility] - [Administrator Settings] - [Sys-
tem Settings] - [Expert Adjustment] - [Problem
Unit Isolation Set.] to isolate the
Finisher
, then
turn the device off and on.