Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Maintenance/Troublesh - Page 29
Replacing the Transfer Belt Unit, Transfer Belt Unit
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2.2 Replacing consumables 2 2.2.5 Replacing the Transfer Belt Unit After the Transfer Belt Unit replacement message has appeared, printing is possible, but the printing quality reduces. Immediately replace the Transfer Belt. 1 Turn the power of this machine off, then disconnect the power cable and interface cable. 2 Open the Front Cover. 3 Remove all of Toner Cartridge, Waste Toner Bottle, and Imaging Unit. % For information on how to remove a Toner Cartridge, refer to page 2-3. Inclining the Toner Cartridge may cause toner to spill. % For information on how to remove a Waste Toner Bottle, refer to page 2-12. Inclining the Waste Toner Bottle may cause toner to spill. % For information on how to remove an Imaging Unit, refer to page 2-6. Cover the removed Imaging Unit with a cloth to keep from being affected by light. 4 Pull the lever (1), then open the Right Door (2). % When opening the Right Door, be sure to fold the Manual Feed Tray in advance. [Maintenance/Troubleshooting] 2-16