Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Applied Functions Use - Page 63
[E-mail Settings] - [E-mail RX (POP)]
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
1.5 Available operations in Administrator mode 1 Item [POP Before SMTP] [POP Before SMTP] [POP Before SMTP Time] [SMTP Authentication] [SMTP Authentication] [SMTP Authentication method setting] [Account] [Password] [Domain Name] [Authentication Setting] Description Configure the setting if your environment requires the POP Before SMTP Authentication for sending an E-mail. Select whether or not to use POP before SMTP. Configure the setting if your environment requires the POP Before SMTP Authentication for sending an E-mail. [Disable] is specified by default. If necessary, change the waiting time until starting E-mail transmission after the POP authentication is successful. [5] sec. is specified by default. Configure the setting if your environment requires the SMTP authentication for sending an E-mail. Select whether or not to use SMTP authentication. [Disable] is specified by default. When using SMTP authentication, specify whether or not to enable the following authentication methods. • [Kerberos] • [NTLM v1] • [Digest-MD5] • [CRAM-MD5] • [LOGIN] • [PLAIN] [Enable] is specified by default in every case. When you have selected [Enable] in [SMTP Authentication], enter the user ID for SMTP authentication (using up to 255 bytes). When you have selected [Enable] in [SMTP Authentication], enter the password (using up to 128 bytes). To enter (change) the password, select the [Change Password] check box, then enter a new password. When you have selected [Enable] in [SMTP Authentication], enter the domain name (realm) for SMTP authentication (using ASCII characters of up to 255 bytes). This item is necessary when the SMTP authentication method is Digest-MD5. Select whether to synchronize the SMTP authentication with the user authentication of this machine. This item is necessary when the user authentication is installed on this machine. • [Use User Authentication]: Uses the user name and password of the user registered in this machine as [Account] and [Password] for SMTP authentication. • [Use SMTP Authentication Setting]: Uses the values you entered in [Account] and [Password]. [Use SMTP Authentication Setting] is specified by default. [E-mail Settings] - [E-mail RX (POP)] To display: Administrator mode - [Network] - [E-mail Settings] - [E-mail RX (POP)] Configure the settings on the E-mail reception function of this machine. Item [E-mail RX (POP)] [POP Server Address] [Port Number] [SSL/TLS] Description Select whether or not to enable this machine to receive E-mails. [Enable] is specified by default. Enter the address of your E-mail server (POP). Use one of the following formats. • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" If necessary, change the port number of the E-mail server (POP). [110] is specified by default. Select whether or not to use SSL for communication with the E-mail server (POP). [Disable] is specified by default. [Applied Functions] 1-57