Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Box Operations - Page 31

3.1 Control panel 3 3 Control Panel/Liquid Crystal Display 3.1 Control panel Use the control panel for User Box mode operation. The following describes the buttons and switches in the control panel. 1 2 3 4 22 21 5 20 6 19 7 18 17 8 16 9 15 14 13 12 11 10 No. Name 1 Touch panel 2 Power indicator 3 [Sub power switch] 4 [Power Save] 5 [Mode Memory] 6 [Utility/Counter] 7 [Reset] 8 [Interrupt] Description Various screens and messages are displayed. Configure the various settings by directly touching the panel. Lights up in blue when the machine is turned on with the main power switch. Press this switch to turn on/off machine operations, including copying, printing and scanning. When turned off, the machine enters an energy conserving mode. Press this key to enter Power Save mode. While the machine is in Power Save mode, the indicator on the [Power Save] key lights up in green and the touch panel goes off. To exit from Power Save mode, press the [Power Save] key again. Press this key to register (store) the desired copy/scan settings as a program or to recall a registered copy/scan program. Press this key to display the Utility screen and the Meter Count screen. Press this key to clear all settings (except programmed settings) entered using the control panel and touch panel. Press this key to enter Interrupt mode. While the machine is in Interrupt mode, the indicator on the [Interrupt] key lights up in green and the message "Now in Interrupt mode." appears on the touch panel. To cancel Interrupt mode, press the [Interrupt] key again. bizhub C652/C652DS/C552/C552DS/C452 3-2