Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 15

Adjust the Stacker, Run the Job, Procedure for a Saved Job, Stacker, Book Stacker, Procedure

Get Konica Minolta bizhub PRESS 1250 PDF manuals and user guides View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

2 - How to Run the PowerSquare - Adjust the Stacker Step Action Information 9 Touch CLOSE. 10 If needed, save the job set- If the same job settings are used frequently, tings to memory. then save the job settings to memory. See "Save a job" on page 26. Procedure for a Saved Job 1. Touch LOAD & SAVE . 2. Touch the job name or use the Up arrow and the Down arrow to select the job. 3. Touch LOAD. 4. Wait until the PowerSquare is ready. Adjust the Stacker Stacker Adjust the stacker according to the size and thickness of the finished book. See "Adjust the Stacker" on page 35. Book Stacker Check the Book Stacker is ready to accept books. See "Adjust the Book Stacker" on page 36. Run the Job Procedure 1. Make sure the adjustments on the PowerSquare are complete before you release the print job from the print queue. 2. Start the print job. The PowerSquare starts automatically. 3. Check the quality of the first book. 4. If the quality is not acceptable, make adjustments. See "Book Quality Problems" on page 43 for further information. During the job • Unload books from the stacker before the stacker is full. The PowerSquare stops and displays a message if the stacker is full. • If the optional Book Stacker is fitted, see "Unload the Book Stacker" on page 37. • Empty the trim bin from time to time. The PowerSquare displays a message if the trim bin is full. See "Empty the Trim Bin" on page 33. Watkiss PowerSquare™224 User Manual 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
2 - How to Run the PowerSquare - Adjust the Stacker
Watkiss PowerSquare™224 User Manual
11
Procedure for a Saved Job
1. Touch
LOAD & SAVE
.
2.
Touch the job name or use the Up arrow and the Down arrow to select the
job.
3. Touch
LOAD
.
4.
Wait until the PowerSquare is ready.
Adjust the Stacker
Stacker
Adjust the stacker according to the size and thickness of the finished book. See
“Adjust the Stacker” on page 35.
Book Stacker
Check the Book Stacker is ready to accept books. See “Adjust the Book
Stacker” on page 36.
Run the Job
Procedure
1.
Make sure the adjustments on the PowerSquare are complete before you
release the print job from the print queue.
2.
Start the print job. The PowerSquare starts automatically.
3.
Check the quality of the first book.
4.
If the quality is not acceptable, make adjustments. See “Book Quality Prob-
lems” on page 43 for further information.
During the job
•
Unload books from the stacker before the stacker is full. The PowerSquare
stops and displays a message if the stacker is full.
•
If the optional Book Stacker is fitted, see “Unload the Book Stacker” on
page 37.
•
Empty the trim bin from time to time. The PowerSquare displays a message
if the trim bin is full. See “Empty the Trim Bin” on page 33.
9
Touch
CLOSE.
10
If needed, save the job set-
tings to memory.
If the same job settings are used frequently,
then save the job settings to memory.
See “Save a job” on page 26.
Step
Action
Information