Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 61
Error - No Comms, Error In Trim Area
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference DFA INTERFACE - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. DRIVE MOTOR STALL There is a paper jam. Check the machine and correct the error. See "Paper Jams" on page 64. Touch STOP to clear the message from the screen. Endlay axis moving The endlay axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. ENDLAY - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. ERROR IN TRIM AREA There is an error at the trimmer. Check the trimmer for a paper or book jam. See "Jam in the Trim Area" on page 69. Touch STOP to clear the message from the screen. ERROR - No Comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FLOW ERROR BRIDGE There is an error at the connecting bridge. Open the connecting bridge cover and check for a paper jam. See "Jam in the Connecting Bridge" on page 64. Touch STOP to clear the message from the screen. FLOW ERROR FORMER There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 66. FLOW ERROR GATHER AREA There is a paper jam in the gather- See "Jam in the ing area. Open the connecting Gathering Area" bridge cover, lift the gathering area on page 65. and remove the paper jam. Watkiss PowerSquare™224 User Manual 57