Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 66
Touch Pad Error, Too Many S
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference STITCH - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Stitch position adjusting The stitch position is adjusting. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. STITCH TIMEOUT Press STOP . Open the folder cover, remove the paper, close the folder cover. SYSTEM ERROR 00.20 40.21 40.22 Touch STOP to clear the message from the screen. If the message does not clear, use the mains ON/ OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. SYSTEM ERROR 39.xx Press the reset button on the stacker. If the message does not clear, use the stacker mains ON/ OFF switch. Turn the stacker OFF, then turn the stacker ON. If the problem continues, then call your service engineer. TOO MANY PAGES The printer has delivered too many sheets into the gathering area. Remove the incorrect set. Touch STOP to clear the message from the screen. Check the settings for SET THICKNESS or SHEET THICKNESS. TOUCH PAD ERROR There is a fault with the START and STOP touch pads. If the problem continues, then call your Watkiss service engineer. Touch START to clear machine There may be some paper in the machine. Touch START to clear the machine before you start a new job. 62 Watkiss PowerSquare™224 User Manual