Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 65
Stacker Full, Comms Fail
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference Rotate axis moving The rotate axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. SHUTTLE MOTOR COMMS FAIL Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. SHUTTLE MOTOR ERROR Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Sidelay axis moving The sidelay axis (size adjustment) is adjusting. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. SIDELAY - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. STACKER FULL The stacker is full. Unload the books from the stacker. STACKER - No comms Check that the stacker power input is connected. Check that the stacker mains ON/ OFF switch is ON. If the problem continues, then call your service engineer. Stitch axis moving The stitch axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Stitch length will change The stitch length cannot adjust at soon the moment. The stitch leg length will adjust after the next book. Watkiss PowerSquare™224 User Manual 61