Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 64

MAIN CONTROL - No, See Clear a Stitch

Get Konica Minolta bizhub PRESS 1250 PDF manuals and user guides View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

5 - Error Conditions, Problems and Solutions - Message List Message Information Reference JAM IN STITCH HEAD There is a jam in the stitch head. See "Clear a Stitch Head Jam" on page 74. JAM IN TRIMMER There is a book jammed in the trimmer. Clear the jam and continue. See "Jam in the Trim Area" on page 69. MAIN CONTROL - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. MANUALLY PARK SHUTTLE The shuttle is not parked correctly. Open the folder cover and move the shuttle to the park position. Close the folder cover. The shuttle will reset. When the message list is clear, continue operation. See "Manually park the Shuttle" on page 79. MISSING STITCHES The machine has detected missed stitches. Check if the stitch-wire is jammed or if the stitch-wire spool is empty. See "Clear a Stitch-wire Jam" on page 72 or see "Install New Stitchwire" on page 94. MOTOR CONTROLLER The drive motor controller is not NOT READY ready. If the problem continues, contact your service engineer. OPERATOR MAINTENANCE The machine needs routine main- See "Operator tenance by the operator. Maintenance" on page 81. REBOOT THE MACHINE Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. REMOVE SET FROM FOLD AREA Open the folder cover and remove See "Jam in the the set. Folder or Former Area" on page 66. REMOVE SET - GATH- Open the gathering area and ERING AREA remove the sheets. See "Jam in the Gathering Area" on page 65. REMOVE SET STITCH AREA Open the folder cover and remove See "Jam in the the set. Stitch Area" on page 66. 60 Watkiss PowerSquare™224 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
5 - Error Conditions, Problems and Solutions - Message List
60
Watkiss PowerSquare™224 User Manual
JAM IN STITCH HEAD
There is a jam in the stitch head.
See “Clear a Stitch
Head Jam” on
page 74.
JAM IN TRIMMER
There is a book jammed in the
trimmer. Clear the jam and con-
tinue.
See “Jam in the
Trim Area” on
page 69.
MAIN CONTROL - No
comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
MANUALLY PARK
SHUTTLE
The shuttle is not parked correctly.
Open the folder cover and move
the shuttle to the park position.
Close the folder cover.
The shuttle
will reset.
When the message list
is clear, continue operation.
See “Manually
park the Shuttle”
on page 79.
MISSING STITCHES
The machine has detected missed
stitches.
Check if the stitch-wire is jammed
or if the stitch-wire spool is empty.
See “Clear a
Stitch-wire Jam”
on page 72 or see
“Install New Stitch-
wire” on page 94.
MOTOR CONTROLLER
NOT READY
The drive motor controller is not
ready. If the problem continues,
contact your service engineer.
OPERATOR MAINTE-
NANCE
The machine needs routine main-
tenance by the operator.
See “Operator
Maintenance” on
page 81.
REBOOT THE
MACHINE
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
REMOVE SET FROM
FOLD AREA
Open the folder cover and remove
the set.
See “Jam in the
Folder or Former
Area” on page 66.
REMOVE SET - GATH-
ERING AREA
Open the gathering area and
remove the sheets.
See “Jam in the
Gathering Area”
on page 65.
REMOVE SET -
STITCH AREA
Open the folder cover and remove
the set.
See “Jam in the
Stitch Area” on
page 66.
Message
Information
Reference