Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 62
FLOW ERROR - OUT, position. Touch START
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference FLOW ERROR - OUTFEED There is an error at the outfeed. Remove the trim bin and open the trim stop guard to remove the book. See "Jam in the Trim Area" on page 69. If necessary, open the main deck to remove the book. FLOW ERROR STITCHER There is an error at the stitcher. See "Jam in the Open the folder cover and remove Stitch Area" on the book. page 66. If the problem continues, then call your service engineer. Fold blade axis moving The fold blade axis (book thickness adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. FOLD BLADE NOT PARKED Open the folder cover, remove the paper, close the folder cover. Touch START , then follow the instructions on the screen. FOLD - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FORM CLAMP CLOSED The form clamp is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM ROLLER ERROR Open the folder cover, remove the See "Jam in the paper, close the folder cover. Folder or Former Area" on page 66. FORM ROLLER NOT PARKED The form roller is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM CLAMP ERROR There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 66. 58 Watkiss PowerSquare™224 User Manual