Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual - Page 67
TRIM BLADE NOT, Trim Bin
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Trim axis moving TRIM BIN OPEN TRIM BLADE NOT PARKED TRIM - No comms USER STOP Information Reference The trim axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. The trim bin is not fitted or is not contacting the safety switch. Fit the trim bin. See "Empty the Trim Bin" on page 33. The trim blade is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. The user has touched the STOP button while the machine is in operation. Touch START to restart the machine. Watkiss PowerSquare™224 User Manual 63