Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 15
Power-saving function, If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] ap
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Power-saving function Using the following functions can reduce the power consumption of this machine and provide greater power-saving effects. Function Description Power Save func- Auto Low Power tion Turns off the touch panel display to reduce the power consumption of this machine. This machine is placed into the Auto Low Power mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more This mode is available when [Auto Low Power] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] [Power Save Setting] - [Power Save Function Setting]. There are eight power-saving time periods available: 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min. and 240 min., from which you can select the desired one. Power-saving time periods, 90 min., 120 min., and 240 min., may not be displayed depending on regions. Auto Shut OFF Turns off all LEDs except Power Save LED and Power LED on the control panel, to reduce the power consumption of this machine. This machine is placed into the Auto Shut OFF mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more If the Auto Shut OFF mode is kept for a long time, it may take a while to warm up this machine upon restart. This mode is available when [Auto Shut OFF] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. There are seven power-saving time periods available: 0 min., 1 min., 30 min., 60 min., 90 min., 120 min., and 240 min., from which you can select the desired one. Auto Wake-up Specifies whether to automatically release the Auto Shut OFF mode Cond. (Displayed for all print jobs or for only some print jobs. When print jobs are re- only when the Im- ceived in the Auto Shut OFF mode, the Auto Shut OFF mode is au- 1 age Controller IC- tomatically released according to this setting and the jobs are 602 is installed.) printed. If you press [All Jobs] to highlight the button, the Shut OFF mode is automatically released even during Auto Shut OFF, and all print jobs can be output. If the button highlight display is released, during Auto Shut OFF, the Shut OFF mode is automatically released and print jobs can be out- put only when they are received from [PS Plug-in driver] or [Page- Scope Direct Print]. To process other jobs, use this machine after releasing the Shut OFF mode. ErP Setting Turns the main power off after the Auto Low Power mode, Auto Shut OFF mode, or the sub power switch is kept in the off state for the specified period of time. There are seven power-saving time periods available: Do Not Switch,12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, and 72 Hours, from which you can select the desired one. If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] appears dimmed and you cannot configure this setting. Monochrome Energy-save Mode For monochrome printing, you can carry out it in energy-save mode. Weekly Timer Automatically turns the power of this machine on or off based on the specified time or day of the week. 1-3