Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 73
Enter the zoom ratio or the image shift value using the keypad, side to be adjusted.
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
% Press [Front] or [Back] to select the print side to be adjusted. bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L & Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value. [Vertical] is used to adjust the zoom ratio in the crosswise direction. [Horizontal] is used to adjust the zoom ratio in the paper feed direction. To enlarge the print side, enter the value with a positive mark (+). To reduce it, enter the value with a negative mark (-). The adjustment value changes 0.01% on a 1-step basis. Adjustment Range: [Vertical] -1.00 to +1.00, [Horizontal] -1.00 to +1.00* * [Horizontal] of [Back] must be specified between -0.80 and +0.20. - To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or [Right/Left], then enter the value. To move the print side upward or rightward, enter the value with a positive mark (+). To move the print side downward or leftward, enter the value with a negative mark (-). The adjustment value changes 0.1 mm on a 1-step basis. Adjustment range: [Up/Down] -10.0 to +10.0, [Right/Left] -3.0 to +3.0 - To switch the positive mark (+) and negative mark (-), press [+/-]. - To reset a value, press [Clear]. - To adjust the zoom ratio and image shift, check the status in the center of a page. 5 5-23