Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 89
Click [Start]., When the message is displayed, click
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
, Click [Start]. bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L - When a message appears, place the FD-5BT on the white calibration plate, then click [OK] while holding it down. NOTICE NOTICE When the FD-5BT is placed on the plate, it does not come into contact with the white calibration plate. Securely press down. If there is a gap, the default adjustment will fail. . When the message is displayed, click [OK] to start the measurement. / Prepare the printed chart. - Place five to 10 blank sheets of the same color under the printed chart so that it will not be affected by the color of the working table. 5 5-39
5-39
bizhub PRO C1060L
5
bizhub PRESS C1070/C1070P/C1060/C71hc
K
Click [Start].
L
When a message appears, place the
FD-5BT
on the white calibration plate,
then click [OK] while holding it down.
NOTICE
NOTICE
When the
FD-5BT
is placed on the plate, it does not
come into contact with the white calibration plate.
Securely press down. If there is a gap, the default
adjustment will fail.
M
When the message is displayed, click
[OK] to start the measurement.
N
Prepare the printed chart.
-
Place five to 10 blank sheets of the same
color under the printed chart so that it will
not be affected by the color of the working
table.